Fire Conventional Model 5230




•1.1. How do I get into Program Mode? 




------------------------------------------------------------------------




Q:



 How do I get into Program Mode?




A:

 To get into program mode use the following steps:
   1. From the 5230 remote Annuciator press 27 then ENTER.
   2. Enter the INSTALLER CODE or 5128

Programming with the 5230 Remote Annunciator

NOTES:  The system will automatically time out of programming mode if no keys are pressed 
for four minutes. If you press function keys very quickly, you may get ahead of the LCD 
display. Wait for the appropriate message to be displayed before you press ENTER.

      TO                       KEYSTROKES:
ENTER PROGRAMMING       27ENTER [Installer's Code]The first line of the LCD will show the 
MODE                    programming option forStep 1, "ZONE ACTIVE." The second line will 
                        show the most recently programmed value for that option.

PROGRAM AN OPTION       Type in your new data and then press ENTER.

SKIP A STEP             Press ENTER. The data in the skipped step will not change. The LCD 
                        will show the next option.

GO TO A SPECIFIC        Press STEP.  The first line of the LCD will show "ENTER THE STEP #" 
STEP                    and the current step number. Type in the new step number, then 
                        press ENTER. Line 1 of the LCD will show the option name; line 2 
                        will show the programmed data for the step. (If you try to go to a 
                        step that does not exist, the display will go back to the previous 
                        step.)

SELECT YES OR NO        Press any digit to toggle Yes and No.

SELECT AN OPTION        Press the option number. (Option numbers appear next to the option 
FROM A MENU             name in Section 5.3.)

ENTER ALPHABETIC        SHIFT1 for A or 10SHIFT2 for B or 11SHIFT3 for C or 12SHIFT4 for D  
DATA OR NUMBERS         or 13SHIFT5 for E or 14 Note that only the alphabetic characters 
LARGER THAN 9           appear on the display.

CORRECT AN ERROR        Press CLEAR. Then type in the correct data and press ENTER.
(If you have not 
pressed the ENTER 
key.)

LEAVE PROGRAMMING 	Press STEP STEP CLEAR CLEAR.
MODE AT ANY TIME






For Additional Information feel free to e-mail us.